Levita CS35 2x20V Original Instructions Manual page 43

WARNING
Risk of personal injury due to chainsaw in operation.
• Keep your hands in safe distance.
Never use the machine with a damaged cover or pro-
tective device or without cover or protective devices.
• Remove the battery pack before starting any adjustment,
cleaning and maintenance work on the device. Wait until
all rotating parts have stopped and the appliance has
cooled down.
Check the work area before using the appliance.
Remove any hard objects such as stones, shards of glass,
wires, etc. that could be thrown off, knocked back or that
could otherwise cause injury or damage during appliance
operation.
Never use the appliance when the proper equipment
is not fitted.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
SYMBOLS
Warning /Caution!
WARNING! Please read the instructions
carefully before starting the machine.
Remove the battery pack before
starting any work on the appliance.
Wear goggles.
Wear ear protectors.
20V
2,0Ah
Safety helmet
40Wh
Chain saw safety boots
Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany
Charger to be used in closed spaces
only.
Warning against thrown-off items
Do not let other persons get near due
to foreign objects being thrown off.
Minimum safe distance is 15 m.
=
= Cutting-Line
38x10mm
20V
2,0Ah
40Wh
20V
LBB 202
2,0Ah
40Wh
Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany
45
Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany
54,5x24,5mm
www.ikra.de
CE 5 x 7 mm
54,5x24,5mm
CE 5 x 7 mm
Check all screw and plug-in connections and protective
equipment if firm and tightened properly and whether
all moving parts are running smooth whenever the
appliance is to be put into operation.
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in conflict
with the designation and it is prohibited to attach any
protective equipment of other manufacturers.
If the appliance starts abnormally vibrating, switch
the engine off and search for the cause immediately.
Generally, vibrations are a warning against operating
failure.
= Cutting-Line
When being blocked, turn the appliance immediately off
and remove the jammed item.
The appliance must be stored in a dry place and
Cutting-Line
protected from frost.
Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
38x10mm
38x10mm
LBB 202
LBB 202
45
45
www.ikra.de
54,5x24,5mm
20 V
www.ikra.de
CE 5 x 7 mm
201x
XX
Typ LI 22
(do not prin
(do not print !)
(do not print !)
Do not expose tools to rain. Do not use
tools in damp or wet locations.
Remove the battery pack before
starting any adjustment, cleaning and
maintenance work on the device.
European Conformity Mark
Typ LI 22
Made in China
Protect the battery against temperatures
Typ LI 22
above 45°C.
Made in China
Protect the battery against heat and fire.
Typ LI 22
201x
Made in China
Protect the battery against water and
moisture.
201x
Output voltage
Direct Current
Output current
Input voltage / AC Current
Frequency, Rated input
Sound power level
Recommended battery types
EN ENGLISH
91
91.7x
9
91.7x
41