Advertisement
K450 hot tank drain
We recommend that internal weekly cleaning instructions are
followed before draining down and powering off machine
– guidance can be found by clicking on link below.
Machine user guides - Select KLIX® 400 – 600 - User Guide
K450 Drain Tutorial – YouTube Video
Care must be taken when draining tank as it contains hot water and
there is a risk of scalding.
Advertisement
Table of Contents
Summary of Contents for Klix K450
- Page 1 – guidance can be found by clicking on link below. Machine user guides - Select KLIX® 400 – 600 - User Guide K450 Drain Tutorial – YouTube Video Care must be taken when draining tank as it contains hot water and...
- Page 2 Steps below to drain hot tank Step 1. Isolate power to machine by either switching off mains plug or removing internal plug which is located inside machine on the back- left hand side of carousel. Turn off water supply by following blue pipe from back of machine to the stop valve and turn off water supply at mains.
- Page 3 Step 3. Pic 1 Pic 2 Before removing the drain plug please ensure that the clamp is in the closed position (pic 1) if not then push together until closed as per above pic. Step 4 Put a bucket in place and remove the drain plug from the end of the hose.
- Page 4 Step 5 Care must be taken when draining tank as it contains hot water and there is a risk of scalding. Open the clamp by pushing down on the bottom part of the clip releasing the clamp to open as per pic. Step 6 Once the tank is drained close the clamp and push the plug back into the top of the hose.
- Page 5 Re – commission machine Reconnect water and power supply. Close the door and allow machine to fill and heat up the water tank, this will take approx. 15mins. Test vend 2 to 4 drinks to ensure machine is operational. If machine has cold drink option Place machine on to free vend using free vend switch.
Need help?
Do you have a question about the K450 and is the answer not in the manual?
Questions and answers