Advertisement
Replace Batteries and Turn Power On
• Open the fasteners on the bottom of the toy
and remove the sound unit.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove
the door.
• Remove the exhausted batteries and dispose
of them properly.
• Insert two, new AAA (LR03) alkaline batteries.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• Slide the power/volume switch, on the back
of the electronics box, to ON with low
volume
, ON with high volume
OFF .
• Replace the sound box back inside the toy.
Make sure the button is facing the front of
the toy.
• Close the fasteners.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and back on.
• When the sounds from this toy become faint
or stop, it's time for an adult to change
the batteries.
• Protect the environment by not
disposing of this product or any
batteries with household waste. This
symbol indicates that this product
shall not be treated as household
waste. Check your local authority for
recycling advice and facilities.
1,5V x 2
AAA (LR03)
For longer life,
use alkaline batteries.
or
Advertisement
