Fisher-Price DYM86 Manual

Place a figure in Place a figure in
the correct shape the correct shape
and press for lights, and press for lights,
sounds and songs! sounds and songs!
• For best performance and longer battery life, we
recommend replacing the batteries that came with
this toy with three, new AA (LR6) alkaline batteries.
• Locate the battery compartment door. Loosen
the screw in the battery compartment door with
a Phillips screwdriver. Remove the batteries and
properly dispose of them.
• Insert three, new AA (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
contain important information.
Spin for lights Spin for lights
Battery installation is required.
and sounds. and sounds.
Only adults should install batteries.
Requires three AA batteries
demonstration purposes only.
Slide the power/volume switch to
ON with low volume,
• When sounds/lights from this toy become faint or
stop, it's time for an adult to change the batteries.
• Wipe the toy with a clean, damp cloth. Do not
immerse. This toy has no consumer serviceable
parts. Do not take apart.
• If this toy begins to operate erratically, you may
need to reset the electronics. Slide the power/
volume switch off and back on.
DYM86
Keep these instructions for
future reference as they
Required tool: Phillips
screwdriver (not included).
1,5V x 3
AA (LR6)
(included) for operation.
Batteries included are for
ON with
high volume or OFF.