Page 1
Please note that “bun” will beep shortly as soon as it detects the magnet but you need to hold the magnet until you hear a long beep. Note: Make sure that you are within the WiFi range you want to connect your “bun hygro” to it and the WiFi is ON.
Page 2
10) Sweep (do not hold) the magnet over the centre of your bun. You will hear a short beep as soon as the device detects the magnet and after approximately 12 seconds you will hear 4 short beeps that means your bun has successfully uploaded its first measurements. info@loggerflex.com.au www.loggerflex.com.au (02) 89714548...