Related Manuals for Loggerflex bun hydro
Summary of Contents for Loggerflex bun hydro
- Page 2 Introduction “Bun hygro” is a temperature and humidity (RH) recorder and alarm system, which measures temperature and RH in desired intervals and uploads the readings to a web based application via your home or office Wi-Fi. It is powered by and internal ultra-long life battery. “Bun hygro” can send out email and text message notifications, if measured parameters exceed or fall below pre-defined limits.
- Page 3 Package contents (figure 1) “Bun hygro” device (1 piece) One (1) piece of ring magnet One (1) Screw One (1) plastic screw anchor One (1) nail User manual booklet Figure 1...
- Page 4 Product’s technical specifications Temperature measurement Range: Temperature measurement accuracy: RH measurement range: RH accuracy: - 5 ~ + 70 °C (internal sensor) >5 °C = ±0.3 °C 0 ~ 100 % >20 & <80% = ±3% 20 ~ +160 °F <5 °C max.
- Page 5 Installation Strong magnet makes it easy to mount the device to any steel surface. To mount “Bun hygro” on other materials, you can easily mount the ring magnet in the package using a nail or screw (and screw anchor) on the wall and simply attach the Figure 2 magnet on the device to other magnet on the wall.
- Page 6 Operation Instructions First steps are creating an account and claiming your device. To do this: • Please visit www.loggermaster.com and create an account following the website’s instructions. Please read the loggermaster's condition of use and privacy notice very carefully. By creating an account, you agree to loggermaster's condition of use and privacy notice. Note: •...
- Page 7 Activating your device by connecting “bun hygro” to your Wi-Fi To save the battery, your device is sleep mode. You need to activate it before using it as follows: • Place a magnet on the center of your device (marked with icon) and wait for 3 seconds (figure 3).
- Page 8 Figure 4 Key in following information in the page: • Wi-Fi name (SSID) of the network that you wish to connect your device to. make sure the device is within the range of Wi-Fi network and Wi-Fi is on. SSID is case sensitive so make sure you are typing the SSID Note: correctly with no extra space.
- Page 9 Note: • If you fail to connect to “Bun hygro” hotspot within 3 minutes, session will expire following with two (2) long beeps (like phone line busy signal: ) ــــــ ــــــand you need to trigger the hotspot with magnet again. If your “bun hygro”...
- Page 10 Web based application • By logging into your account, you can always adjust key parameters in "my profile" including language, time zone, country, default log in page (define your landing page when you log in), password, emails and phone numbers (to receive notifications) •...
- Page 11 You can select or de-select any device by clicking on its row and following four (4) new options will appear on top menu bar if any device is selected: Edit: By clicking on Edit you will access to "Device’s attributes" page where you can adjust your device’s parameters as following: •...
- Page 12 • Alarms: you can set your device to push notifications to you via email or text message for three (3) different situations: If each measured parameters (like temperature) exceed or fall from a maximum or minimum defined thresholds. If server does not receive any uploads for a certain defined time in minutes from your device. If an error code rise in the device.
- Page 13 You can set “upload intervals” on “on demand” mode. In this mode your device will not try to connect to Wi-Fi unless you trigger force upload by hovering a magnet on magnet Note: sensor of the device. Device will try to upload readouts stored in internal memory before reaching the maximum memory records capacity (16300 records). By reaching the number of recorded Note: readouts in internal memory, all records will be deleted automatically and device continues logging like before.
- Page 14 Quick references • Magnet Triggering Short hover: Will force the device to upload immediately (force to upload) Long hover (>3 seconds): Will trigger “setup” mode and device will create a hot spot named “bun hygro”. • Type of beeps • Single short beep: Magnet hover is detected.
- Page 15 Errors Your device benefits of an advanced diagnosis system. Any hardware problem will appear on Loggermaster’s page and dashboard. Each error condition appears with a unique code. Here are the list of errors and their meanings: • Error # 3: Your device temperature/RH sensor is malfunctioning. •...
- Page 16 Diagnosis If you have not received any readings for a while, take the following procedures: • Keep sure you added your device and activate your device correctly following instructions in this booklet. • Check if your battery is alive. To check this, you can quickly hover a magnet over magnet sensor of your device. Your device should respond with a short beep. •...
- Page 17 Warnings • Never insert any object into sensor opening on the device. • Do not immerse into water or other liquid. • Do not attempt to open or repair the device. • Do not expose to direct sunlight, heat (higher than + 70 °C or +160 °F except for sensor part of devices with external sensor) or direct flame. •...
- Page 18 Terms and conditions of use This user manual is subjected to change without notice. When permitted by law, manufacturer will not be responsible for lost profits, revenues or financial losses or indirect, special, consequential, exemplary, or punitive damages. To the extent permitted by law, the total liability of manufacturer of this device for any claims under these terms, including for any implied warranties, is limited to the amount you paid us.
- Page 19 We Warrant the device against defects in materials and workmanship under ordinary consumer use for 3 years from the date of original retail purchase excluding battery. During this warranty period, if a defect arises in the device and you follow the instructions for returning it, we will at our option, to the extent permitted by law, either repair, replace with a new or refurbished device, or refund to you all or part of the purchase price for the device.
- Page 20 Loggerflex smart devices LTD. info@loggerflex.com www.loggerflex.com...