Table of Contents
Advertisement
Program
• Up to 20 tracks can be programmed for disc play in any order.
• Be sure to press the STOP button before use.
1.
Press the PROG button, the display will show 01 and flash.
Select desired track by using the SKIP + or SKIP – button.
2.
3.
Press the PROG button again to confirm desired track into the
program memory.
4.
Repeat steps 2 and 3 to enter additional tracks into the
program memory.
5.
When all the desired tracks have been programmed,
press the
button to play the disc in the order you have
programmed the tracks and the program indicator flashes.
6.
Press the STOP button twice to terminate programmed play
and the program indicator will turn off.
Repeat
Press the REPEAT button before or during CD playback. You can set a single track or all the
tracks to play repeatedly. Each press switches the repeat mode as follows:
1.
REPEAT 1 (The repeat indicator is flashing.)
2.
REPEAT ALL (The repeat indicator is steadily on.)
3.
NORMAL PLAYBACK
repeat
indicator
REPEAT 1
REPEAT ALL
program indicator
NORMAL
PLAYBACK
GB-9
Advertisement
Table of Contents
Need help?
Do you have a question about the CCDSTR10 and is the answer not in the manual?