Main Table Assembly Diagram - KERN YPS-01 Installation Information

3.3 MAIN TABLE ASSEMBLY DIAGRAM

Assembly instructions:
1. Assemble the FRONT TRIM PANEL using four M8 x 16 screws onto
the 2 x MAIN TABLE SIDE ASSEMBLIES.
2. Fix the 2 x TABLE RAILS using eight M8 x 16 screws onto the MAIN
TABLE SIDE ASSEMBLIES.
3. Put the TABLE TOP onto the main frame using the four Z-CLIPS and
four M8 x 16 screws. Two Z-CLIPS should be fitted and secured first
and then the other two can be fitted when the table top is in place
from underneath. Make sure that the table top is fitted squarely.
4. Now place the MAIN TABLE over the top of the INNER TABLE mak-
ing sure that the marble is not touching the table top.
5. The feet can now be adjusted to make both tables level.
12 YPS-IA-defsi-0610