Indicators on the optional Network Interface Board
Is on when the power of the machine is
on and on while the machine is in a net-
- Status page
The status page of Network Interface Board will be automatically printed in the
• when the printer is turned on.
• when Network Interface Board is reset.
This feature can be disabled with NIB Setup Tool which is included in the Smart-
NetMonitor for Admin program folder.
To disable this feature, check [Property Sheet] in the "NIB Setup Tool" screen.
Click [Detailed...] in the [General] tab and remove the check from the box for "Print
configuration page on start up".
Is blinking while the machine is receiving
print jobs over the network environment
and off when the print jobs have been
sent to the controller.
Connecting the Machine