9.6
Releasing the lock by swiping IC cards
Precondition
On the home screen of the outdoor station, tap "
■
password] [#] to access the "Settings" screen.
On the "Settings" screen, complete the following settings:
"Access control">>"Card mode">>"Safe mode">>"On"
■
If "Safe mode" = "On", this outdoor station will only support IC cards with a token.
■
"Access control">>"User card">>"Enroll"
Swipe the IC cards on the specified area (see the diagram below) to register them.
"Access control">>"Card setting">>"Unlock type when swiping"
■
–
Select a lock type e.g. "Default lock" or "Subsidiary lock", if "Unlock manually" is
selected, you can select a lock type to release on a pop-up window each time when you
swipe the IC card on the specified area.
Note
It is recommended that IC cards are created and maintained only using the local
outdoor station or only using the management software.
Release the lock by swiping a IC card
Swipe a registered IC cards on the specified area to release the lock.
IC card specification
Operating frequency
Standard
Support card
Output format
Product manual 2TMD041800D0006
Operating Door Entry System devices
13.56 MHz
ISO 14443A
Mifare one S50/S70, Mifare desfire EV1/EV2
Wiegand 26/34 bit
", followed by [#] [*] [engineering
│37