Table of Contents
Advertisement
9.1.2
Call a resident via the specified code
Precondition
■
On the home screen, tap "
the "Settings" screen.
On the "Settings" screen, complete the following settings:
■
"Engineering settings">>"System attribute">>"Default call type">>"Call via keypad"
■
"Engineering settings">>"System attribute">>"Call mode">>"Logical address"
"Access control">>"Contact">>"Add">>[number] [Specific code] [Name] (see the picture
■
below)
–
If device type = outdoor station, [number] = room number
–
If device type = gate station, [number] = building number + room number
Note
It is recommended that contacts are created and maintained only using local
outdoor station or only using the management software.
Product manual 2TMD041800D0006
Operating Door Entry System devices
", followed by [#] [*] [engineering password] [#] to access
│25
Advertisement
Table of Contents
