Maintenance - Emerson AVTRON LOADBANK LPH400 Manual

Maintenance

Good maintenance procedures must be followed to provide long equipment life and to reduce the
chance of electric shock, fires, and personal injury. Before servicing, review Section I, SAFETY
CONSIDERATIONS, of this manual.
The following are examples of scheduled maintenance procedures. These examples are not
purported to be all-inclusive, but must be accomplished to maintain the equipment in a good,
safe condition. All maintenance work must be done by qualified personnel only.
*************************************************************
Personal injury from electrical shock or from the rotating fan blade
may result if ALL sources of power are not disconnected before
servicing. (Refer to Section I, SAFETY CONSIDERATIONS, of
this manual.)
*************************************************************
DAILY
1. Remove any Load Bank airflow restrictions.
2. Check the screens to make sure that no objects have blocked or entered the openings.
Also verify screens are not damaged. Repair or replace any damaged screens.
3. Verify that the airflow is in the proper direction.
4. Ensure that there is no recirculation of the exhaust air through the Load Bank.
SECTION V
MAINTENANCE
W A R N I N G
5-1
Avtron Model LPH400 • Resistive Load Bank
Part Number LPH400D30693-1