Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI.
DJI has made and may make available. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document.
Mounting hole for accessory Mounting hole for Universal Mount Screw Studs Back Front Installation 1. If you want to attach an accessory with a 3/8" thread, remove the screw in the mounting hole.
Page 5
2. Attach the Mounting Adapter to the Universal Mount. Align the studs with the narrow slot and secure with the 1/4” screw on the Universal Mount. Align Secure...