Table of Contents
Advertisement
OPTION PROGRAMMING
Different options allow for the OneRemote INT converter to carry out various functions. Option programming is
normally performed at the initial installation and is not a daily event. One or more options may be entered. The
options are remembered even after power failure.
An option is entered with the remote control by keying in 8 keystrokes, in a combination that is not existing in normal
use. Each keystroke shall be entered within a 3 second interval from the previous one, or the activity is ignored.
STAND BY OPTION
The OneRemote DVB-C VI is normally NOT turned off with the TV, but in some cases this procedure is not
advantageous. An HDD recorder might be running using the signal from the receiver.
The standby option allows for de-activation of automatic shut off.
The DVB-C VI is ALWAYS turned on when its connected input is selected, no matter the Auto Standby option.
0qqqqq
0qqqqq
www.oneremote.dk
70
AUTO STD BY, de-activated
71
AUTO STD BY, activated
4
Advertisement
Table of Contents
