Mattel Polly Pocket Wall Party Instructions
Mattel Polly Pocket Wall Party Instructions

Mattel Polly Pocket Wall Party Instructions

Advertisement

Quick Links

Keep these instructions for future reference as they contain important information.
Please read all instructions before beginning assembly and set-up.

You will need:

Contents:

Before applying Command
· CAUTION: NEVER use with wallpaper. May not adhere well to vinyl surfaces.
· CAUTION: NEVER hang items over beds.
· Make sure the wall surface is clean and dry. If cleaning is necessary,
3M recommends using isopropyl rubbing alcohol. DO NOT use household cleaners.
· Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
When removing brackets from wall:
· NEVER pull strip towards you.
· NEVER press bracket against wall.
· ALWAYS hold bracket gently in place to prevent
it from hitting fingers.
· ALWAYS pull tab on Command
AND STRAIGHT DOWN WALL. Stretch at least
12 inches (30.5 cm) until bracket and strip release.
Purchase medium Command
Refill Strips to reapply to your wall.
®
Approximately 3 feet of
open wall space
Strips:
®
Strip SLOWLY
®
Instructions
Instructions
Watch a video of these instructions at
www.pollypocket.com/wallparty
NOTE: Video in English only.
1 Cover
WARNING:
CHOKING HAZARD
– Small parts.
Not for children under 3 years.
Hangs with
20 minutes
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Polly Pocket Wall Party and is the answer not in the manual?

Questions and answers

Summary of Contents for Mattel Polly Pocket Wall Party

  • Page 1 Instructions Instructions Watch a video of these instructions at www.pollypocket.com/wallparty NOTE: Video in English only. WARNING: CHOKING HAZARD – Small parts. Not for children under 3 years. Hangs with ® Keep these instructions for future reference as they contain important information. Please read all instructions before beginning assembly and set-up.
  • Page 2 Assemble the Playset Apply Command Strips ® Separate strips. Remove red-printed liner from Command Strips and ® apply to back of brackets as shown. Make sure the strip tab is accessible for future removal. NOTE: DO NOT PULL BRACKET OFF WALL without reading removal instructions. Red Printing = On Bracket Black Printing = On Wall Attach Brackets...
  • Page 3 Hang Main Playset on Wall 1. Remove black-printed liner from Command Strip. ® 2. Position playset level against the wall at a suitable height for your child. 3. Press brackets firmly onto wall and hold for 30 seconds. NOTE: For optimal adhesion performance, 3M recommends waiting 1 hour before playing. Press firmly for seconds...
  • Page 4 © 3M 2012. All Rights Reserved. ©2012 Mattel and/or Origin Products Ltd. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. 1-800-524-8697. Mattel Australia Pty. Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.

Table of Contents