Mattel polly pocket Wall Party Instructions

Keep these instructions for future reference as they contain important information.
Please read all instructions before beginning assembly and set-up.

You will need:

Approximately
1 foot of open
wall space
15 minutes
Before applying Command
· CAUTION: NEVER use with wallpaper. May not adhere well to vinyl surfaces.
· CAUTION: NEVER hang items over beds.
· Make sure the wall surface is clean and dry. If cleaning is necessary 3M recommends using
isopropyl rubbing alcohol. DO NOT use household cleaners.
· Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).

When removing bracket from wall:

· NEVER pull strip towards you.
· NEVER press bracket against wall.
· ALWAYS hold bracket gently in place to prevent
it from hitting fingers.
· ALWAYS pull tab on Command
AND STRAIGHT DOWN WALL. Stretch at least 12
inches (30.5 cm) until bracket and strip release.
Purchase medium Command
Contents:
Strips:
®
Strip SLOWLY
®
® Refill Strips to reapply to your wall.
Instructions Instructions
Watch a video of these instructions at
www.pollypocket.com/wallparty
NOTE: Video in English only.
CHOKING HAZARD
Not for children under 3 years.
Hangs with
WARNING:
– Small parts.
®