MK Controls Lightning Bug Instruction Manual page 22

6. When I press the LEFT and RIGHT buttons to test the system, nothing
happens
- Please verify that your camera to Lightning Bug
inserted, and inserted correctly, into your camera. Some cables, like
the Nikon DC2, can inadvertently be plugged in backwards.
7. There's lightning all around me, but the lightning bolt on the Lightning
Bug™ never lights up
- Increase the sensitivity of the Lightning Bug™ by pressing the RIGHT
arrow.
- Make sure that the Lightning Bug™ is not behind a pane of glass -
most modern glass windows in cars and homes block infrared light,
which the Lightning Bug™ needs to 'see' in order to function.
8. My camera keeps tripping the shutter whenever the Lightning Bug™ is
attached to it
- Decrease the sensitivity of the Lightning Bug by pressing the LEFT
arrow.
9. I can't see my pictures on the camera back immediately after a shot is
taken
- Change the meter mode function in the Lightning Bug™ to set the
meter to 'Always Off' - see the Operations section of this manual for
more details.
10. What do I do if none of these suggestions works?
- You can either contact us to discuss the issue, or you can return the
unit to us for service - see
http://www.mkcontrols.com/lightningbug/rma/
Note: For SONY cameras, a hotshoe adapter may be required – see our website
for full details.
TM
cable is fully
for instructions.
Rev: Version 3.1d May 9
th
, 2017 Page 22 of 27