Table of Contents
Advertisement
Quick Links
WARRANTY AND DISCLAIMER
DIGITAL
MANUFACTURES AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP
FOR A PERIOD LIMITED TO 1 YEAR FROM THE DATE OF SHIPMENT,
PROVIDED THE PRODUCTS HAVE BEEN STORED, HANDLED, INSTALLED,
AND USED UNDER PROPER CONDITIONS.
The company's liability under this limited warranty shall extend only to the
repair or replacement of a defective product, at the company's option. DIGITAL DELAY
INC. disclaims all liability for any affirmation, promise, or representation with respect to
the products.
The customer agrees to hold DIGITAL DELAY INCORPORATED harmless
from, defend, and indemnify DIGITAL DELAY INC. against damages, claims, and
expenses arising out of subsequent sales of or use of DIGITAL DELAY INC. products, or
products containing components manufactured by DIGITAL DELAY INC. and based
upon personal injuries, deaths, property damage, lost profits, and other matters which
BUYER, its employees, or sub-contractors are or may be to any extent liable, including
without limitation, penalties imposed by the Consumer Product Safety Act (P.L. 92-573)
and liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act (P.L.
93-637), as now in effect or as amended hereafter.
No warranties expressed or implied, are created with respect to the company's
products except those expressly contained herein.
disclaimers and limitations contained and relies on no other warranties or affirmations.
1014-SCR
DELAY
INC.
2036 Fillmore Street
Davenport, Ia. 52804
www.racedigitaldelay.com
WARRANTS
THE
The customer acknowledges the
1
563-324-1046
PRODUCTS
IT
Advertisement
Table of Contents
Related Manuals for DIGITAL DELAY Crossover Plus with 4-Stage Timer
Summary of Contents for DIGITAL DELAY Crossover Plus with 4-Stage Timer
-
Page 1: Warranty And Disclaimer
The customer agrees to hold DIGITAL DELAY INCORPORATED harmless from, defend, and indemnify DIGITAL DELAY INC. against damages, claims, and expenses arising out of subsequent sales of or use of DIGITAL DELAY INC. products, or products containing components manufactured by DIGITAL DELAY INC. and based... -
Page 2: Table Of Contents
Digital Delay, Inc.. Designed to be more reliable and user friendly than any other multi-function delay box on the market. The Crossover Plus with 4-Stage Timer has a 16 digit keypad for fast and precise entry of information into the unit while two illuminated multi-segment liquid crystal displays are used to display all relative information. -
Page 3: Features, Applications, And Specifications
Specifications Features: • Discrete solid state I/O (input - output) construction • Microprocessor controlled timing with accuracy to 0.0001 of a second • Retains all numbers even with power disconnected from unit • Large displays for easy reading of times •... -
Page 5: The Terminal Strip
The Terminal Strip 12VDC Terminal: Connect the +12VDC terminal to a switched +12 volt source with enough amperage capable of driving both the transbrake and the throttle stop at the same time. Transbrake Terminal: Connect the Transbrake terminal to the Transbrake solenoid. -
Page 6: The Displays
The Displays There are two displays, A and B, that are used to show all relative information about the Crossover Plus with 4-Stage Timer. Each display can display up to six different times or mode settings. Display A: The six shown on Display A are Your Time, Delay 1 Time, Number of Bumps, P.B. -
Page 7: The Keypad
The Keypad The keypad is made up of numerical and function keys that are used to control the information that is either entered or shown on the displays. The numerical keys 0-9 are used only to enter new times. The function keys A-F are used to control different functions of the unit. Function Keys A and B The function keys A and B correspond to displays A and B respectively and are used with the numerical keys when entering new times. -
Page 8: Setting Dial-Ins, Delay, And Stage Times
Setting Dial-In Times To set a new Dial-In time into either Your Time or Their Time press the C key until the Dial-In times are being displayed. To enter a new number press the corresponding letter key (A or B) to the display containing the Dial-In time to be changed. -
Page 9: Setting Push Button Mode And Interrupt Time
Setting Push Button Mode and the Push Button Interrupt Time To set the Push Button Mode press the D key until the Push Button Mode is shown on Display A. The left most digit shows “1” or “ 2” to indicate which Push Button Mode the unit is in, when in 1 Push Button Mode, the First P.B. -
Page 10: Wiring And Testing The Unit
L.E.D. should light. The Crossover Plus with 4-Stage Timer has a built-in test mode for the displays and the red L.E.D.s. The function key F is held down while the power is being turned on, the unit will go into a test mode and stay in the test mode until the F key is released. -
Page 11: Explanation Of The 4-Stage Timer
Explanation of the 4-Stage Timer This is to help the racer understand the 4-Stage Timer when controlling a throttle stop. The 4- Stage Timer can also be used to control other timed devices, nitrous, or timing retarders. Stage 1 represents when the throttle stop turns on. Stage 2 represents the amount of time (duration) the throttle stop will stay on.