Summary of Contents for Martin Yale Industries 1611
Page 1
Troubleshooting the 1611 and 1711 folding machines When machine is turned on only a humming noise can be heard. Check the belt and pulley under the operator side cover Paper will not feed into the machine Check for paper under the bridge (the metal piece between the feed wheel and fold rollers).
Page 2
Folding incorrectly Check for placement of the second fold table with the manual. Check both fold table setting. There are two fold tables to adjust when using this machine. Folder shuts off early Check the stacking wheel position in the exit. If the exit sensor is uncovered for a few seconds the folder will shut off.
Page 3
The folder is taking too many sheets at one time The retarder is too loose. Turn the adjustment on top of the machine ¼ turn at a time and test. Continue until the folder only takes one sheet at a time. 1711 ONLY Machine beeps and stops folding One of the fold tables has lost the connection to the logic board.