Table of Contents
Advertisement
Quick Links
Troubleshooting the 1611 and 1711 folding machines
When machine is turned on only a humming noise can be heard.
Check the belt and pulley under the operator side cover
Paper will not feed into the machine
Check for paper under the bridge (the metal piece between the feed wheel
and fold rollers). Use a rewards card, letter opener, or another thin stick object to
clear any paper from this area.
Check the feed wheel to see if it is turning. If it is not turning check the set
screws on the feed wheel, the pulley and belt under the non-operator side cover.
Jamming
Clean the fold rollers. Dirty rollers can cause jamming.
Check for obstructions in the machine.
Check placement of the second fold table with the manual.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Martin Yale Industries 1611
Summary of Contents for Martin Yale Industries 1611
- Page 1 Troubleshooting the 1611 and 1711 folding machines When machine is turned on only a humming noise can be heard. Check the belt and pulley under the operator side cover Paper will not feed into the machine Check for paper under the bridge (the metal piece between the feed wheel and fold rollers).
- Page 2 Folding incorrectly Check for placement of the second fold table with the manual. Check both fold table setting. There are two fold tables to adjust when using this machine. Folder shuts off early Check the stacking wheel position in the exit. If the exit sensor is uncovered for a few seconds the folder will shut off.
- Page 3 The folder is taking too many sheets at one time The retarder is too loose. Turn the adjustment on top of the machine ¼ turn at a time and test. Continue until the folder only takes one sheet at a time. 1711 ONLY Machine beeps and stops folding One of the fold tables has lost the connection to the logic board.
Need help?
Do you have a question about the 1611 and is the answer not in the manual?
Questions and answers
How do I release a paper jam
To release a paper jam in a Martin Yale Industries 1611, follow these steps:
1. Clean the fold rollers – Dirty rollers can cause jamming.
2. Check for obstructions – Look inside the machine for any stuck paper or foreign objects.
3. Verify the second fold table placement – Ensure it is correctly positioned according to the manual.
If the issue persists, inspect the feed wheel and surrounding components for any blockages.
This answer is automatically generated