Safety Track ST-50 A 'How To' Manual page 6

STEP 4:
Now that everything is out in the open,
replace the old battery with the new one.
FIG 1
STEP 5:
Connect the battery back to the motherboard
and start to slide the battery and
motherboard back into the body of the
device. You will notice in FIG 1, that the black
resistors on the motherboard are facing
down toward the battery. In FIG 2, take
notice at the groves that the motherboard
slides in on both sides of the body.
STEP 6:
With everything lined up and wires re-
connected, slide the battery and
motherboard back into the body of the
device.
! 6