Connecting To A Computer - Sony A6100 Help Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-6100
α6100

Connecting to a computer

Insert a sufficiently charged battery pack into the camera, or connect the camera to a wall outlet (wall
1
socket) using an AC Adaptor (sold separately).
Turn on the camera and the computer.
2
Check that [USB Connection] under
3
Connect the camera to the computer using the micro USB cable (supplied) (A).
4
When you connect the camera to the computer for the first time, the procedure for recognizing the camera may
start automatically on the computer. Wait until the procedure is finished.
If you connect the product to your computer using the micro USB cable when [USB Power Supply] is set to
[On], power is supplied from your computer. (Default setting: [On])
Note
Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established
between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or
waking the computer from sleep mode, disconnect the camera from the computer.
Related Topic
USB Connection
USB LUN Setting
(Setup) is set to [Mass Storage].
5-009-879-11(1) Copyright 2019 Sony Corporation
341