Bulb Shooting - Sony A6100 Help Manual

Interchangeable lens digital camera
Hide thumbs Also See for A6100:
Table of Contents

Advertisement

Help Guide
Interchangeable Lens Digital Camera
ILCE-6100
α6100

Bulb shooting

You can shoot a trailing image of the movement of a subject with long exposure.
Bulb shooting is suitable for shooting trails from stars or fireworks, etc.
Set the mode dial to M (Manual Exposure).
1
Turn the control wheel counterclockwise until [BULB] is indicated.
2
Set the aperture value (F-value) by turning the control dial.
3
Press the shutter button halfway down to focus.
4
Press and hold the shutter button for the duration of the shooting.
5
As long as the shutter button is pressed, the shutter remains open.
Hint
When shooting fireworks, etc., focus at infinity in manual focus mode. If you use a lens whose infinity point is unclear, adjust the
focus on the fireworks in the area you want to focus on in advance.
In order to perform bulb shooting without causing the image quality to deteriorate, we recommend that you start shooting while
the camera is cool.
During bulb shooting, images tend to blur. It is recommended that you use a tripod, a RMT-P1BT Bluetooth remote commander
(sold separately) or a remote commander equipped with a lock function (sold separately). When using the RMT-P1BT Bluetooth
remote commander, you can start bulb shooting by pressing the shutter button on the remote commander. To stop bulb shooting,
press the shutter button on the remote commander again. To use the other remote commander, use the model which can be
connected via the Multi/Micro USB terminal.
Note
The longer the exposure time, the more noise will be visible on the image.
When [
Long Exposure NR] is set to [On], noise reduction is performed after shooting for the same duration that the shutter
was open. You cannot shoot while noise reduction is in progress.
You cannot set the shutter speed to [BULB] in the following situations:
[Smile Shutter]
[Auto HDR]
[Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.].
[Multi Frame NR]
When [Drive Mode] is set to the following:
[Cont. Shooting]
[Self-timer(Cont)]
[Cont. Bracket]
[
Silent Shooting]
If you use the above functions when the shutter speed is set to [BULB], the shutter speed is temporarily set to 30 seconds.
148

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ilce-6100

Table of Contents