Coxo C-SMART Usage Manual page 12

ⅱ Power manage
1. Battery power
LCD displays the current battery power, the number of lattice shows more,
and the power is fuller. If there is no electricity the lattice will flicker which
means the battery power is about to run out , at this status the beeper will
,
ring per 3S and unit will shut down after 60S
2. Battery recharging
To fully recharge the battery, you should connect the unit to adaptor at
least for 4 hours or more
more), the sign will be running during the battery charging
Notice: when the instrument is connected to the adaptor,
the beeper will beep for three times, showing the connect-
ion is correct.
3. Supply by main power
Please connect instrument to adaptor when the battery power is not en-
ough. When the connection is completely, the instrument will be supplied by
the main power and charging the battery automatically
.
4 Automatic power off
The instrument will shut down automatically when it ceases working for
3 minutes. In that case
Notice: When power off, the LCD will show recharging sign
when charging
10
(
The new battery requires at least 8 hours or
,
all display and function will stop.
.
.
.
，