Royalcraft Aspen Rope Chair Assembly Instructions page 4

Please note the diagram is for reference only, it may not fully represent the
actual appearance of the parts.
Step One
Place the Seat (A) upside down onto a
soft surface to avoid the scratches.
Attach the Front Legs (B) and Rear Legs (C)
onto the bottom of the Seat (A) using
Flat Washers (F3), Spring Washers (F2)
and Bolts (W25).
Once you are satisfied with the alignment
of all components, carefully tighten all bolts
using Spanner (S).
Cover each Bolt Head with Bolt Head Cap (F).
Step Two
Stand the Chair in the upright position.
Place the Seat Cushion (D) and
Backrest Cushion (E) onto the chair Seat.
Level the chair with Adjustable Feet Screw.
Your Chair is now ready for use.
Never tilt the Chair during use. Ensure the product is always placed firmly on the ground.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
Aspen Rope Chair - Box of 6
Assembly Instructions
Step by step assembly instructions
C
B
E
D
Adjustable Feet Screw
www.royalcraft.co.uk
F
W25
F2
F3
A
4 / 4