Advertisement
Table of Contents
Instructions to Reset
WARNING!
It may be necessary to reset the desk after unplugging,
power outages, assembly, or when troubleshooting.
1. Press and hold the UP ARROW and DOWN ARROW simultaneously on the controller until 3 blinking
zeros appear on the display.
2. The desk will descend to its lowest height, then rise to its highest, and then descend to middle-
height. Desk is ready when 38 (±1) appears on the display.
000
38(±1)
UP + DOWN simultaneously
Blinking
followed by
Contact us for live help with assembly and troubleshooting!
We're happy to help make your Seville Classics experience as satisfying as possible.
If you have any questions or any issues at all, don't hesitate to give us a ring or send us an email.
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST), Monday to Friday
Email:
Support@SevilleClassics.com
Homepage:
www.SevilleClassics.com
Address: 19401 South Harborgate Way, Torrance, CA 90501 – 1322, USA
Thank you for shopping with Seville Classics!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Seville Classics AirLift
Summary of Contents for Seville Classics AirLift
- Page 1 Contact us for live help with assembly and troubleshooting! We're happy to help make your Seville Classics experience as satisfying as possible. If you have any questions or any issues at all, don't hesitate to give us a ring or send us an email.
- Page 2 Troubleshooting Tips Problem Action Desk displays , or memory Reset the desk. See other side for instructions. buttons rise to the wrong height. Desk does not go up or down and the Check all connections. Make sure power cord is plugged into the controller does not illuminate when control box and a power outlet.
Need help?
Do you have a question about the AirLift and is the answer not in the manual?
Questions and answers
ASE error code what does it mean?
The ASE error code for the Seville Classics AirLift desk indicates that the desk needs to be reset.
This answer is automatically generated
I **** trying to reset my desk, but when I hold down the up and down arrows, Loc displays on the screen. The lowest i can get my desk to go os 33.9 and the highest is 40.7
The provided context does not specifically mention how to reset the Seville Classics AirLift desk when "Loc" displays on the screen. However, it does provide general reset instructions:
1. Press and hold the UP ARROW and DOWN ARROW buttons simultaneously until three blinking zeros (000) appear on the display.
2. The desk will move to its lowest height, then rise to its highest, and finally settle at a middle height.
3. The desk is ready when the display shows 38 (±1).
If "Loc" refers to a locked state, try holding the appropriate buttons to unlock the controls before performing the reset.
This answer is automatically generated