Advertisement
Table of Contents
PureForm & EcoForm Luminaire Mounted on PTF2 (3-1/2" O.D.), PTF3 (4-1/2" O.D.) or PTF4
(5.00" O.D.) Pole Top Fitter
PTF2
POLE TOP
FITTER CAP
STRAIN RELIEF ROD
TAPE OR WIRE TIE
SUPPLY & GROUND
WIRES
3/8-16 X 1.75" BOLTS
(8) 3/8" SOCKET
SET SCREWS
PTF3/PTF4
POLE TOP
FITTER CAP
STRAIN RELIEF ROD
TAPE OR WIRE TIE
SUPPLY & GROUND
WIRES
3/8-16 X 1.75" BOLTS
(8) 3/8" SOCKET
SET SCREWS
(4) #8-32 PHILLIPS FLAT HEAD SCREWS
1/29/2019
page 1
www.gardcolighting.com
(2) #10-32 PHILLIPS PAN HEAD SCREWS
3/8" HEX NUT AND SPLIT LOCK WASHER
LUMINAIRE LEADS
SPLIT LOCK WASHER AND FLAT WASHER
SAFETY CABLE
FITTER STOP
ARM COVER
(2) #8-32 PHILLIPS PAN
HEAD SCREWS
(2) #10-32 PHILLIPS PAN HEAD SCREWS
3/8" HEX NUT AND SPLIT LOCK WASHER
LUMINAIRE LEADS
SPLIT LOCK WASHER AND FLAT WASHER
SAFETY CABLE
FITTER STOP
ARM COVER
PureForm / EcoForm
P26, P34, & ECF2
Area Luminaire
FIG. 1
FIG. 2
PN 442294663261 Rev A
Advertisement
Table of Contents
Related Manuals for Gardco PureForm P26
Summary of Contents for Gardco PureForm P26
- Page 1 PureForm / EcoForm P26, P34, & ECF2 Area Luminaire PureForm & EcoForm Luminaire Mounted on PTF2 (3-1/2” O.D.), PTF3 (4-1/2” O.D.) or PTF4 (5.00” O.D.) Pole Top Fitter (2) #10-32 PHILLIPS PAN HEAD SCREWS PTF2 POLE TOP FITTER CAP 3/8” HEX NUT AND SPLIT LOCK WASHER LUMINAIRE LEADS STRAIN RELIEF ROD TAPE OR WIRE TIE...
- Page 2 PureForm & EcoForm Luminaire Mounted on PTF2 (3-1/2” O.D.), PTF3 (4-1/2” O.D.) or PTF4 (5.00” O.D.) Pole Top Fitter FITTER "X" USED ON TENON SIZE TENON HEIGHT TYPE DIA. (Ø) PTF2 2-3/8" TO 2-1/2" O.D. X 4" HIGH 3-1/2" PTF3 3"...
- Page 3 PureForm & EcoForm Luminaire Mounted on PTF2 (3-1/2” O.D.), PTF3 (4-1/2” O.D.) or PTF4 (5.00” O.D.) Pole Top Fitter ADD SILICONE TO THESE AREAS FIG. 5 Signify North America Corporation Signify Canada Ltd. © 2019 Signify Holding. All rights reserved. This document may be subject to change. No representation or warranty as to the accuracy or completeness of the information 200 Franklin Square Drive, 281 Hillmount Road,...
Need help?
Do you have a question about the PureForm P26 and is the answer not in the manual?
Questions and answers