Advertisement
Available languages
Available languages
Table of Contents
INSTALLATION INSTRUCTIONS
PUREFORM GEN. 2 – P26 AREA LUMINAIRES—BIRD DETERRENT
1.
PLACE (2X) METAL STRIPS ON TOP OF LUMINAIRE WITH STUDS FACING UP AS SHOWN IN FIGURE 1.
2.
BEND ALL FOUR TABS OF THE METAL STRIPS AROUND LUMINAIRE'S OUTER EDGE AND INTO TOP
COVER OF LUMINAIRE AS SHOWN IN FIGURE 2 TO SECURE.
3.
ATTACH BIRD DETERRENT SPIKES TO METAL STRIPS USING THE PROVIDED HARDWARE (4X 8-32
NUTS).
4.
SECURE THE LOOSE ENDS OF SPIKE STRIPS NEAR THE MOUNTING ARM TO TOP OF LUMINAIRE
WITH VHB TAPE PROVIDED.
5.
IF NECESSARY, TRIM ANY ADDITIONAL LENGTH OF SPIKES THAT OVERHANG THE LUMINAIRE.
SPIKES
© 2018 Signify Holding. All rights reserved. This document contains information relating to the product portfolio
of Signify which information may be subject to change. No representation or warranty as to the accuracy or
completeness of the information included herein is given and any liability for any action in reliance thereon is
disclaimed. The information presented in this document is not intended as any commercial offer and does not
form part of any quotation or contract. All trademarks are owned by Signify Holding or their respective owners.
P/N 443560818880 Rev B
Page 1 of 1
FIGURE 1
FIGURE 2
(RESULTS MAY VARY)
Signify North America Corporation
200 Franklin Square Drive
Somerset N.J. 08873, USA
Signify Canada Ltd./Signify Canada Ltée.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
METAL STRIP
SECURE
WITH VHB
TAPE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gardco PUREFORM GEN. 2 P26
Summary of Contents for Gardco PUREFORM GEN. 2 P26
- Page 1 INSTALLATION INSTRUCTIONS PUREFORM GEN. 2 – P26 AREA LUMINAIRES—BIRD DETERRENT METAL STRIP FIGURE 1 PLACE (2X) METAL STRIPS ON TOP OF LUMINAIRE WITH STUDS FACING UP AS SHOWN IN FIGURE 1. BEND ALL FOUR TABS OF THE METAL STRIPS AROUND LUMINAIRE’S OUTER EDGE AND INTO TOP COVER OF LUMINAIRE AS SHOWN IN FIGURE 2 TO SECURE.
- Page 2 DIRECTIVES D’INSTALLATION PUREFORM GEN. 2 – LUMINAIRES POUR ÉCLAIRAGE LOCALISÉ P26 – AVEC POINTES DE DISSUASION DES OISEAUX BANDE DE MÉTAL FIGURE 1 PLACEZ (2X) BANDES DE MÉTAL PAR-DESSUS LE LUMINAIRE, LES CRAMPONS POINTANT VERS LE HAUT, COMME LE MONTRE LA FIGURE 1. PLIEZ LES QUATRE TAQUETS DES BANDES DE MÉTAL AUTOUR DU BORD EXTÉRIEUR DU LUMINAIRE ET JUSQUE DANS SON COUVERCLE SUPÉRIEUR, COMME LE MONTRE LA FIGURE 2, POUR BIEN L’ASSUJETTIR.
Need help?
Do you have a question about the PUREFORM GEN. 2 P26 and is the answer not in the manual?
Questions and answers