Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for montpellier MCA52S
Summary of Contents for montpellier MCA52S
- Page 1 52cm Canopy Cooker Hood MCA52S - 52cm Cod:0103087495-00.02...
- Page 2 Welcome Thank you for choosing this Montpellier Canopy been designed to provide you with the best combination of style, reliability and performance to give you years of trouble-free use. You may be familiar with a similar product, but please take time to read these instructions carefully before installing or using your to ensure you get the most from your purchase.
-
Page 4: Using Your Extractor
Using your Extractor For best performance, you should switch on the extractor 15 minutes before starting to cook and leave it to run for approximately 15 minutes after the end of cooking. Control Panel Light switch B – Power switch C –... -
Page 5: Charcoal Filter
The grease filter should be kept clean to minimize the risk of fire. At least once a month the grease filters should be removed and cleaned with warm soapy water. You can also wash the grease filters in a dishwasher, ensuring that the filters are put in an upright position to prevent damage from other items in the dishwasher. -
Page 6: Changing The Light Bulb
Only use bulbs recommended for your extractor. Do not fit bulbs of a higher power rating. Bulbs of a lower power rating may be adequate for use, generally last longer and use less energy. Spare bulbs are available from Montpellier Customer Care or from a local DIY shop. - Page 7 PROTECTION LINE FUSE 5A 5A Fuse is installed inside the plug to protection line.
- Page 8 service engineer...
- Page 9 If the instructions provided with your gas hob state that the required distance between the hob and the extractor must be greater than 700mm, then that is the distance which should be observed. This is a legal requirement and may lead to your hob being disconnected from the gas supply and the installation reported to RIDDOR (the height...
-
Page 10: Installation
Extractor dimensions. . g i INSTALLATION Mark out the dimensions of the cut-out based on your MCA52S extractor. . g i... - Page 11 INSTALLATION Remove the grease filter, unscrew the 4 screws of the Connect the exhaust pipe to the ducting adaptor and fixed panel and remove it. locate on the extractor as indicated. Place the extractor into the cabinet opening and secure Secure the panel on with the 4 previously removed it with screws.
- Page 12 Attribute Symbol Value Units Model Identification MCA52S Annual Energy Consumption 29.4 Hood Time Increase factor Hood 72.4 (C) Hood Measured Airflow at Best 94.7 Measured Pressure at Best Maximum Airflow 206.4 Measured Electric Power at Best 38.0 Nominal Lighting Power...
-
Page 13: After-Sales Assistance
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS. Your new Montpellier appliance carries a free guarantee which protects you against the cost of repairs during the Any claim is accompanied by evidence of the model reference, model serial number and proof of purchase, such of claim. - Page 14 Montpellier Domestic Appliances Ltd. Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire GL20 8JU www.montpellier-appliances.com The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Need help?
Do you have a question about the MCA52S and is the answer not in the manual?
Questions and answers