Mitsubishi Electric GK-2509YS2-CE Handbook page 15

[7] Unscrew the screw (one PTT screw 4x10, indicated
by ), and remove the cord clip that is fixing the
cord assembly.
[8] Remove the guard.
[9] Remove the orifice and propeller fan in the left end (power cord side).
a. Remove the propeller fan in the left end.
See (3) [5].
b. Unscrew the screws (four special (spl) screws
4x10, indicated by
the left end.
[10] Remove the air guide in the left end, and replace
the cord assembly.
When reassembling
Reassemble the unit in the reverse order of disas-
sembly.
Fix all the components securely.
After reassembly, always make a test run to make
sure that the unit operates properly.
See (3) [4].
), and remove the orifice in
Cord assembly
Orifice
─ 15 ─
Cord clip
Air guide