Duratool D03169 Quick Start Manual

LED Magnifying Lamp with Third Hand

IMPORTANT SAFETY INFORMATION

• When using electrical appliances basic safety precautions should always be
followed.
• This product is designed for indoor use only.
• Do not expose the lamp to moisture or damp under any circumstances.
• Keep the device out of the reach of children less than 8-years-old.
• Children should be supervised to ensure that they do not play with the appliance.
• Never leave the lamp unattended while it is in use.
• Always cover the magnifying glass with the plastic cover when it is not in use.
• Do not touch the device if the lamp or mains adaptor is damaged in any way. Refer
servicing to qualified personnel.
• When cleaning, do not use any chemicals, abrasives or solvents that could
damage the magnifying lamp.

FEATURES

• Multi-purpose tool, ideal for working on small PCBs, components and soldering.
• The magnifying lamp with an integrated third hand is intended for illuminating work
areas and it is equipped with a magnifying glass.
• The device comes with a soldering iron stand, alligator clips, soldering wire spool
holder, sponge, solder paste tray and a cleaning ball tray, to help with soldering.
• It is powered either by four AA batteries (not provided) or an external power supply
(not provided).

OPERATION

• Remove the lamp from the packaging and place it on a stable, level surface.
• Adjust tthe lamp holder and the light-arm as desired.
• Insert four AA batteries or plug the power adaptor in, in order to power the unit on.
• Switch on the LED magnifying lamp and begin operation.
Model: D03169