Duratool DT000093 Quick Start Manual

Magnifying Lamp

Features

• Ideal for engineers to view micro components or PCB, or medical person or beautician to light or magnify.
• Integration of magnifying and lighting.
• Bright and stable light, no flash feeling, no harm to eyesight.
• Supplied with electronic ballast.

Specifications

Lens Size : 108mm × 174mm
Lens Material : Acrylic
Diopter : 3D
Light Sources : 80pcs LED 15W
Standard Mount : Table Base

Operation Instructions

• Take the lamp out of the packaging and place it on a level, even surface.
• Adjust the lamp holder and the light-arm as desired.
• Switching on the LED magnifying lamp, then start your operation.

Important for safe use

• Indoor use only.
• Environment temperature: -20°C to +40°C
• Humidity: ≤95%

Attention

• The product can only be used indoors, never outdoors. Do not expose to moisture, under any circumstances.
• Do not look directly into the light source, when the lamp is in operation.
• Never look into light sources, such as LED lamps or lasers, through the magnifying glass. This may result in eye injuries,
due to the optical interaction.
• Always cover the magnifying glass with the plastic cover when it's not in use, otherwise there is a risk of fire due to the burning
glass effect in direct sunshine.
www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com Page <1> 21/06/17 V1.0