Fimco Volt Edge 5281506 Instruction Manual

Fimco Volt Edge 5281506 Instruction Manual

Battery kit

Advertisement

Quick Links

INSTRUCTION MANUAL
The label on your product may include the following symbols.
V
volts
Ah
Amp hours
Wh
Watt Hours

Important Safety Instructions - Save These Instructions.

Danger:
To reduce the risk of fire or electric shock, Carefully follow these instructions.
Warning:
Before using, read and follow all instructions and cautionary markings on charger, battery pack and product using battery pack.
Warning:
To reduce the risk of injury, basic safety precautions should always be followed including:
Do not incinerate the battery pack, even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic
fumes and materials are created when the battery packs are burned.
Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing
the battery from the charger may ignite the dust or fumes.
If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse
water over the open eye for 15 minutes or until irritation ceases.
Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention.
Warning:
To reduce the risk of injury, basic safety precautions should always be followed including:
Charge battery packs only in Volt Edge 20V max Lithium-ion compatible chargers.
Do not store or charge the battery pack in locations where the temperature may reach above 95°F (35°C) or below 40°F (4°C).
Do not use the battery pack in locations where the temperature may reach above 120°F (49°C) or below -4°F (-20°C).
Retain a copy of receipt for your Fimco Product.
As it will be required to validate any warranty service.
Volt Edge products are warranted against manufac-
turer or workmanship defects for One (1) year from
date of purchase for home owner usage and 90 days
for commercial usage.
Instruction Manual for Volt Edge 20V max* Li-ion Battery Charger
* Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured
under workload, nominal voltage is 18 volts.
A
Amperes
Direct Current
~
Alternating Current
20V, 5A Lithium
Battery Kit (5281506)
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
[5195300
Hz
Hertz
Safety Alert Symbol
Read Owner's Manual
Recycle Battery
(01/20)]
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Volt Edge 5281506 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fimco Volt Edge 5281506

  • Page 1 One (1) year from date of purchase for home owner usage and 90 days for commercial usage. www.fimcoindustries.com 1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049 Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 [5195300 (01/20)]...
  • Page 2 Warning: Never attempt to open the battery pack for any reason. If the battery pack case is cracked or damaged, do not insert into charger or other Volt Edge products. Do not crush, drop or damage battery pack. Do not use battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way.
  • Page 3 Charger Diagnostics: This charger is designed to detect certain problems that can arise with the battery packs or the power source. Problems are indicated by the red and green LEDs. Temperature Delay When the charger detects a battery that is excessively hot or excessively cold, it automatically starts a Temperature Delay, suspending charging until the battery temperature returns to acceptable temperatures.
  • Page 4 Operating Procedure: Charge the battery following the charging procedure. Ensure all fasteners are tight and pump connections are secure. Install the battery ensuring the base is connected and it is fully seated. Press the power button and confirm the green LED turns on. Signaling the power is on. Test the remote by pressing the OFF button on the remote and both green and red receiver LEDs will turn on.
  • Page 5 Exploded View/Parts List 20V, 5A Lithium Battery Kit (5281506) TROUBLESHOOTING Problem Possible Cause Possible Solution Charger Plug charger into a working outlet. not plugged in Check outlet with another device. Temperature is Move charger and battery to a climate-controlled environment and wait for Battery too hot or too cold the product to reach room temperature.
  • Page 6 WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Fimco shall, at its own cost, and at its option, either repair or replace the defective Equipment or part. Fimco will pay for shipping and handling fees to return the repaired or replacement Equipment or part to you.

Table of Contents