Fimco Volt Edge 5164281 Instruction Manual

Fimco Volt Edge 5164281 Instruction Manual

Advertisement

INSTRUCTION MANUAL
Instruction Manual for Volt Edge 20V max* Li-ion Battery Charger
Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under workload, nominal voltage is
18 volts.
The label on your product may include the following symbols.
V
volts
Ah
Amp hours
Wh
Watt Hours
Important Safety Instructions - Save These Instructions.
Save these instructions: This manual contains important safety instructions for battery chargers.
Warning:
Before using charger, read and follow all instructions and cautionary markings on charger, battery pack and product using battery pack.
Warning:
Shock hazard. Do not allow any liquid to get inside charger.
Warning:
Burn hazard. To reduce the risk of injury, charge only designated Volt Edge 20Vmax batteries. Other types of batteries may burst caus-
ing personal injury and damage.
Caution:
Under certain conditions, with the charger plugged into the power supply, the charger can be shorted by foreign material. Foreign mate-
rials of a conductive nature such as, but not limited to, steel wool, aluminum foil or any buildup of metallic particles should be kept away from charger
cavities. Always unplug the charger from the power source when there is no battery pack in the cavity. Unplug charger before attempting to clean.
Warning:
Do not attempt to charge the battery pack with any chargers other than the ones in this manual.
The charger and battery pack are specifically designed to work together.
The chargers are not intended for any uses other than charging designated Volt Edge 20Vmax Lithium-ion batteries. Any other uses may
result in risk of fire, electric shock or electrocution.
Be sure voltage selector is in correct voltage position before plugging in.
For use in the U.S.A., the voltage selector switch must be placed in the 120 volt position. For use in countries, other than the U.S.A., the
voltage selector may need to be placed in other than the 120 volt position. Confirm the voltage available at each country location before using
this product.
Retain a copy of receipt for your Fimco Product.
As it will be required to validate any warranty service.
Volt Edge Chargers are warranted against manufac-
turer or workmanship defects for One (1) year from
date of purchase for home owner usage and 90 days
for commercial usage.
Battery Charger (5164281)
A
Amperes
Direct Current
~
Alternating Current
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
20V, 1A Lithium
Hz
Hertz
Safety Alert Symbol
Read Owner's Manual
www.fimcoindustries.com
[5195301
(11/19)]
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Volt Edge 5164281 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fimco Volt Edge 5164281

  • Page 1 One (1) year from date of purchase for home owner usage and 90 days for commercial usage. www.fimcoindustries.com 1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049 Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 [5195301 (11/19)]...
  • Page 2 Warning: (Continued)  Do not expose charger to rain or snow.  Pull by plug, rather than cord, when disconnecting charger. This will reduce the risk of damage to electric plug and cord.  If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. ...
  • Page 3 Important charging notes: Longest life and best performance can be obtained if the battery pack is charged with the air temperature is between 50°F (10°C) and 80°F (26°C). The charger and battery pack may become warm to the touch while charging. This is normal and does not indicate a problem. Ensure the vents are not blocked to allow cooling.
  • Page 4 WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Fimco shall, at its own cost, and at its option, either repair or replace the defective Equipment or part. Fimco will pay for shipping and handling fees to return the repaired or replacement Equipment or part to you.

Table of Contents