Table of Contents
Advertisement
7. Remove the
SSD
8. Remove the
hard drive assembly
9. Remove the
system fan
10. Remove the
heatsink
11. Remove the
display assembly
12. Remove the
display bezel
13. Remove the
camera
Steps
1. Remove the four (M2x2) screws that secure the display panel to the display back-cover and antenna assembly [1].
2. Lift the display panel and turn it over [2].
3. Peel the tape that secures the display cable to the back of the display panel [1].
4. Lift the latch and disconnect the display cable from the display-panel cable connector [2].
5. Lift the display panel away from the display back-cover and antenna assembly [3].
Removing and installing components
75
Advertisement
Table of Contents
