Advertisement
en
Universal cutter
Before use, read these instructions
carefully in order to become familiar
with important safety and operating
instructions for this appliance.
Please keep the operating instructions in a
safe place. If passing on the appliance to
a third party, always include the operating
instructions.
Universal cutter
(for some models)
Please fold out the illustrated pages.
Figure
A:
Universal cutter XL
1 Universal cutter
2 Blade
3 Attachment
4 Lid
A universal cutter XL can be ordered from
customer service (order no. 753122).
Universal cutter L
4 Lid
5 Universal cutter
6 Blade
7 Ice crushing blade
You can crush ice with the ice crusher
blade. Optimum processing quantity: 4-6 ice
cubes.
Note: The attachment (3) of the universal
cutter XL is used.
Operation
The universal cutter XL is suitable for
cutting meat, hard cheese, onions, herbs,
garlic, fruit, vegetables, nuts, almonds.
With the universal cutter XL use the appli-
ance at full power to prepare honey spread
(according to the recipe see Fig. D).
Always observe the maximum quantities
and processing times in the table (Fig. D).
W The blade is sharp and can
cause injury!
Never grip the blade in the universal cutter.
Take hold of the universal cutter blade by
the plastic handle only. Do not touch blade
with bare hands. Clean them with a brush.
6
Warning!
The universal cutter must be completely
assembled before use.
Caution!
Before cutting meat, remove gristle, bones
and sinews. The universal cutter is not
suitable for cutting very hard items (coffee
beans, radishes, nutmeg) and frozen food
(fruit, etc.).
Fig. B – with blade (size L and XL)
Fig. C – with ice crush blade (size L only)
■ Place the universal cutter on a smooth,
clean work surface and press.
■ Insert the blade.
■ Add food.
Warning!
Blade must sit straight in the universal
cutter so that the attachment sits correctly
(Fig. B / C-3).
■ Place the attachment on the universal
cutter and rotate in a clockwise direction
until it "clicks" into position.
■ Place the base unit on the attachment
and lock into position.
■ Insert the mains plug.
■ Hold the base unit and universal cutter
firmly and switch on the appliance (turbo
speed).
■ Release the ON button after processing.
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the attachment.
■ Rotate the attachment in an anti-clock-
wise direction and remove from the
universal cutter.
■ Take hold of the blade by the plastic
handle and take out.
■ Place the lid on the universal cutter to
keep in the processed ingredients.
Advertisement
