Polygroup TV90M2389C01 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
and easily set up your new tree.
1. B efore you start to assemble your tree, choose an appropriate location near a wall outlet.
Assemble the tree stand and place on a level surface. (See Fig. A)
2.
Fig. A - Tree Stand Assembly
F ig. B - Tree and Light Assembly
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting
into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch
hinges.
7. (For pre-lit trees only) Connect the light strings as per the color labels indicated in
wall outlet. Your entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or broken,
loose or missing bulbs. Connecting the plugs or replace the bad bulbs promptly in order to maintain the performance and
life expectancy of your pre-lit tree.
MODEL #: TV90M2389C01
1-888-919-0070
OR
Polygroup®!
Eye Bolt
Tree top
Section 2
Section 1
Carefully follow the instructions below on how to quickly
1.Unfold the legs and lay the stand in
2. When inserting the bottom section
Assemble
Red Labels
Together
Fig. B
1
a flat area. Then slide the locking
disc downward and snap into place.
of the tree into the assembled stand,
thread the eyebolt into the stand
and tighten until the pole is firmly
secured.
*Electrical Rating F or The Tree
(For Indoor Use Only)
1.7A 120V 60Hz
Assemble
Yellow Labels
Together
Insert
Green Label
Plug Into Wall
Outlet
and insert green label plug into the