Polygroup TV70GN402C05 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting
into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of
branch hinges.
7. (For pre-lit trees only) Connect the light strings as per the color labels indicated in
the wall outlet. Your entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or
broken, loose or missing bulbs. Connecting the plugs or replace the bad bulbs promptly in order to maintain the
performance and life expectancy of your pre-lit tree.
MODEL #: TV70GN402C05
1-888-919-0070
OR
Polygroup®!
Tree Top
Section 2
Section 1
Carefully follow the instructions below on how to quickly and
*Electrical Rating For The Tree
Assemble
Red Labels
Together
Fig. B
1
Insert and slide the legs
upward into the slots of the
base until firmly secured.
(For Indoor Use Only)
1.02A 120V 60Hz
Assemble
Yellow Labels
Together
Insert
Green Label
Plug Into Wall
Outlet
and insert green label plug into