Installation Precautions - Fleet Power 2000 Owner's Manual

INSTALLATION PRECAUTIONS

CAUTION This equipment is not igni-
tion protected and employs compo-
nents that tend to produce arcs or
sparks. To reduce the risk of fire or
explosions, do not install in compart-
ments containing batteries or flam-
mable materials or areas in which
ignition-protected equipment is re-
quired.
WARNING
For continued protection against risk of
electric shock, use only the ground-
fault circuit interrupter (GFCI) type
receptacles detailed in this owner's
manual. Other types may fail to operate
properly when connected to this inverter,
resulting in a potential shock hazard.
CAUTION To reduce the risk of electric
shock and prevent premature failure due to
corrosion, do not mount where exposed
to rain or spray.
CAUTION To prevent fire, do not obstruct
ventilation openings. Do not mount in a
zero clearance compartment, overheating
may result.
NOTICE The output of this device is not
sinusoidal. It has a maximum total har-
monic distortion of 47% and a maximum
single harmonic of 34%.
22
90-0115-00
10/97 Fltman.pm65
CAUTION Risk of electrical shock. Both
AC & DC voltage sources are terminated
inside this equipment. Each circuit must
be individually opened before servicing.
CAUTION Risk of electrical shock. Do
not remove cover, no user serviceable
parts inside. Refer servicing to qualified
service personnel.
APPLICATION INFORMATION Provided
with integral electronic protection
against AC & DC overloads.
AC Inputs
Chassis
Ground
Lug
Fleet Power 2500 shown.
AC Output
Remote
Jack