Home Accents Holiday TG90P3742S00 Quick Start Manual

TM

Safety Information

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should
always be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use.When products are
used in outdoor applications,connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet.If one is not
provided,contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces,candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
h. This is an electric product and not a toy!To avoid risk of fire,
burns,personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or
extensions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material
that is not a part of the product when in use.
m. This product has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only one way.If the
plug does not fit fully in the outlet, reverse the plug.
If it still does not fit,contact a qualified electrician.Do not
use with an extension cord unless plug can be fully inserted.
Do not alter or replace the plug.
n. This product is equipped with push-in type lamps.Do not
twist lamps.
o. This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation.If the
fuse blows, unplug the product from the outlet.Also
unplug any additional strings or products that may be
attached to the product.Replace the fuse as per the user
servicing instructions (follow product marking for proper
fuse rating) and check the product.
p . Read and follow all instructions that are on the product or
provide with the product.
SAVETHESE INSTRUCTIONS
q.

Assembly

Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (D) and lay the stand
on the floor.
Step 3. Slide the locking disk of the tree stand (D) down until
it snaps into place.
Assembling the tree
This tree assmebles with Quick Set® technology ---Set
up and light up your tree in less than 10 minutes!
Step 1. Remove the protective caps from the tree bottom (C)
and zinsert the pole into the tree stand (D).
Step 2. Remove the protective caps from the tree center (B)
and insert the pole into the tree bottom (C) .
Step 3. Insert the tree top (A) into the tree center (B).
Step 4. Shape the branches to your preference by working
from the bottom to the top. When adjusting branches,
ensure that all wires are free of branch hinges.
Step 5. Insert the green label extension cord plug into the
wall outlet. All your lights should now be lit.
Step 6. Shape the tree from the bottom to the top. Start with
the branches farthest from the pole – fan out in a star
shape, and continue until the entire tree is shaped.
Top view
Step 7. When finished shaping the branches, slightly upsweep
all branch tips for a uniform look.
S50
Tree top
S100
S100
S50
Section 2
S100
S100
S100
S100
Section 1
S100
S100
Christmas Tree
Model: TG90P3742S00
Sku #1003 173 212
Side view
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Insert
Green Label
Foot Pedal
Plug Into Wall
on/off Switch
Outlet