Safety Instructions - TECshow DOME CORE 240 User Manual

2. SAFETY INSTRUCTIONS

• Read this manual carefully before using this
product for the first time. This manual includes
important instructions about installation,
operation and safety precautions.
• We will assume no responsability if you do
not comply with these instructions and meet
troubles.
• The output voltage can reach up to 130 volts,
all installations and operation must be referred
to auqlified personnel who has been specially
trained.
• Not suitable for household.
• Do not remove the ground terminal of the
power cord.
1. Location - Keep the unit away from locations
where it is likely to be exposed to high
temperatures or humidity, such as near
radiators, etc. Also avoid locationms which
are subject to excessive dust accumulation
of vibration which could cause mechanical
damage and locations subject to strong
electromagnetic fields, such as close to
broadcast equipment.
2. Ventilation - The unit ventilation slots on the
side and bottom panels. Do not block these
vents.
3. Avoid physical shocks - Strong physical shocks
to the unit can cause damage. Handle it with
care.
4. Do not open the cause ar attemp repairs of
modifications yourself - This products contains
no user-serviceable parts. Refer all repair or
maintenance to qualified enginner.
5. Always power off before making connections
- Always turn the power off before connecting
or disconnecting cables. This is important to
prevent damage to the unit itself as well as
other connected equipment.
6. Clean with a soft dry cloth - Never use solvents
such as Benzine of thinner to clean the unit.
Wipe clean with soft, dry.
7. Always use the correect power supply - Make
sure that the power supply voltage specified
on the rear panel matches your local AC mains
supply. Also make sure that the AC mains
supply can deliver more than enough current
to handle all equipment used in your system.
8. Must be connected correctly - Although this
unit have goodly protect functions to avoid
damage because of short or overload, we
should be turn away short or overload for
system chronically turning normally.
CAUTION
Risk of electric shock do not open.
To reduce the risk of electric shock, do not
remove chassis. No user-serviceable parts
inside. Refer serving to qualified service
personel.
| Tecshow Dome Core 240
English version
P. 3