Basic Camera Setup - X10 SENTINEL VK79A Owner's Manual

B C S
ASIC AMERA ETUP
Your Sentinel Camera is ready to go out of the box! Follow these
steps for a quick setup of your new camera.
Unpack these items.
You should have: the camera and its power supply; the camera
remote; the camera mounting bracket, a weather resistant dome, and
the screws to install the bracket. A wireless video receiver, and it's
video cable and power supply (shown above but sold separately) is
also required if you want to use the camera wirelessly.
4
First you'll set up and test the camera before you install the camera
into the dome. Make sure you read this entire manual first in case
you want to change a setting on the base of the camera before
installing it in the dome.
Connect the camera to power.
Plug the camera's power supply into a standard wall outlet. Plug the
other end into the camera. Remove the protective cover from the
camera's lens.

Basic Camera Setup

5