Noise Emission And Vibration; Responsibilities Of The Operator - Palax C700 COMBI Operating Instructions Manual

Release the crosscut chute from its transport position before launching the
crosscut operation.
Only use a fault-free power take-off drive shaft and attach the chain for the shaft-
guard. Max. 450 r.p.m.
Only operate the machine on a sufficiently firm and level surface.
Only operate the machine in an adequately lit space.
Keep the exhaust pipe of the combustion-engine-driven unit at a safe distance from
anything that might catch fire! Danger of fire!
Always check that all the covers are intact and properly fastened.
Always check that the crosscut saw-bar is intact.
Always ensure that the electric conductors are intact.
Always check that all the controls are operational.
Always check the oil level and make sure that the hydraulic hoses and components
are free of damage.
Before starting the work, make sure that the machine is firmly in position.
During operation
Carelessness during the cut-off operation constitutes a major hazard!
During the cut-off operation, make sure that the tree is always supported at the
support rollers of the crosscut deck. Danger of rolling over!
Exercise particular caution when cutting knotty or crooked logs, because, as a
result of faulty cutting, the log might roll over or twist the saw-bar with enough force
to break it.
Keep the working space clean and clear of foreign objects.
Always stop the engine for refuelling.
Always stop the machine before servicing.
Only cut one log at a time.
Danger! Stay away from moving parts.
Beware of the hot exhaust pipe on the combustion-engine-driven unit!

1.8 Noise emission and vibration

Equivalent continuous A-weighted sound-pressure level at the workstation is 85.4
dB (A) and the sound power level is 105.4 dB (A).
The vibration emission values do not exceed the limit 2.5m/s2.

1.9 Responsibilities of the operator

All the safety-related devices are necessary to ensure a sufficient level of safety.
The machine operator is responsible for the flawless operation of the safety-related
devices and for ensuring that the machine is serviced in a due manner.
Modifying the construction of the machine is prohibited.
The machine must never be operated under the influence of alcohol or drugs.
The machine may only be used to produce firewood.
The operator is responsible for ensuring that no one else is subjected to any
danger.
As the operator, remember that you are fully responsible for any injuries caused by
the removal of any safety-related devices from the machine, or by any modification
to its operation.
translation
6