Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Tormach Manuals
  4. Controller
  5. ECM1V1.5
  6. Installation manual

Tormach ECM1V1.5 Installation Manual

Update kit
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
TECHNICAL DOCUMENT
Version 0420A
INSTALLATION GUIDE
ECM1V1.5 UPDATE KIT
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ECM1V1.5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tormach ECM1V1.5

Summary of Contents for Tormach ECM1V1.5

  • Page 1 TECHNICAL DOCUMENT Version 0420A INSTALLATION GUIDE ECM1V1.5 UPDATE KIT Page 1...

  • Page 2: Required Tools

    Flat-blade screwdriver Flat-blade screwdriver, small Phillips screwdriver Wire crimper (or similar) 1.1 PURPOSE This document gives instructions on installing the ECM1v1.5 Update Kit on a mill. 1.2 PRODUCT INFORMATION Product: ECM1v1.5 Update Kit (PN 39257) Quantity Description 3 A Fuse (PN 31120) 10-Pin Terminal Block (PN 32632)
  • Page 3 2. Remove the wire trough covers shown in the following image. Figure 2-2: Four Phillips head screws securing the shield to the ECM board. Page 3 ©Tormach® 2020 tormach.com Specifications subject to change without notice. TD10571: Installation Guide: ECMv1.5 Update Kit (0420A)
  • Page 4 Figure 2-6: Jumper on the ECM v1.5 board. Figure 2-4: Two tabs removed from the top wire trough. Page 4 ©Tormach® 2020 tormach.com Specifications subject to change without notice. TD10571: Installation Guide: ECMv1.5 Update Kit (0420A)
  • Page 5 Figure 2-11: F1 on the ECM v1.5 board. 14. Find the ECM v1.5 protective cover provided. Page 5 ©Tormach® 2020 tormach.com Specifications subject to change without notice. TD10571: Installation Guide: ECMv1.5 Update Kit (0420A)
  • Page 6 16. Put the ECM v1.4 board into the electrostatic safe bag that you set aside earlier. Then, package the ECM v1.4 board for shipping. Page 6 ©Tormach® 2020 tormach.com Specifications subject to change without notice. TD10571: Installation Guide: ECMv1.5 Update Kit (0420A)
  • Page 7 5. Find the ferrule cap provided. 6. Secure the ferrule cap onto the one-wire end of wire 403 with a wire crimper. Page 7 ©Tormach® 2020 tormach.com Specifications subject to change without notice. TD10571: Installation Guide: ECMv1.5 Update Kit (0420A)

  • Page 8: Verify The Installation

    4. Depending on the results of Steps 2 through 3, do one of the following: Correct Movement You've completed the installation of the ECM Upgrade Kit. Incorrect Movement We can help. Email support@tormach.com to contact Tormach Technical Support for guidance on how to proceed. Page 8 ©Tormach® 2020 tormach.com Specifications subject to change without notice.

This manual is also suitable for:

39257