Advertisement
Quick Links
10 ft / 3m
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Please check with your local regulations prior to purchasing this item.
Some municipalities have restrictions and requirements.
For customer service in the US and Canada, call: 1-877-730-1583, 9:00am - 5:00pm, Monday - Friday
(EST).English.and.French.Spoken.
WARNING: Keep all flame and heat sources away from this canopy fabric. This canopy is made with fabric
that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in
continuous contact with any flame source.
SAFETY PRECAUTIONS AND CARE INSTRUCTIONS
Never set up in windy, rainy, or snowy conditions. Do not let snow or rain accumulate on roof. It will
collapse.
Do not use your canopy as a permanent cover. It is designed for temporary use only.
Do not set up on a steep incline. Do not leave unattended.
Keep your canopy away from all fire sources, such as grills or fire pits. Do not build fires under the
shelter.
Always use an anchoring system. Your canopy will take flight in windy conditions. Anchoring is your
responsibility.
Do not machine wash. Wash with mild soap and water with a soft-bristle brush while the canopy is
open.
Let your canopy dry completely before closing or storing to avoid mildew and rust.
For best results to keep your roof clean and to avoid small rips and tears, it is recommended that the
roof be removed and stored in the carry bag after each use.
9/6/2013
10 ft / 3m INSTANT CANOPY
×
ITM. /ART. 966761
ASSEMBLY INSTRUCTIONS
1
Advertisement
Related Manuals for Proshade INSTANT CANOPY
Summary of Contents for Proshade INSTANT CANOPY
- Page 1 10 ft / 3m 10 ft / 3m INSTANT CANOPY × ITM. /ART. 966761 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Please check with your local regulations prior to purchasing this item. Some municipalities have restrictions and requirements.
-
Page 2: Parts List
PARTS LIST PARTS LIST DESCRIPTION Frame Canopy Roof Name Banner Nut (pre-attached) Zippered Side Wall Roller Bag Ground Stake Carry Bag Ground Stake Packaging Strap (Initially secured on the outside of the roller bag. Please refer to page 6 for alternative use.) 9/6/2013... - Page 3 ASSEMBLY INSTRUCTIONS Please read instructions completely before setting up your Canopy. Make sure you have all the parts as identified on the Parts List. OPEN Put on the canopy. Do not secure the corner of Make sure the foot plates face the ground. the canopy to frame at this moment.
- Page 4 Attach the banner to the canopy top by four buckles. The "pocket sleeves" on each corner are flag holders. Hook two loops on banner on the nut to keep the (flags not included) banner flat. Secure side walls to the frame with the fastening Always anchor the canopy to the ground.
- Page 5 CLOSE Unzip and remove the side walls on each side. Use push-buttons to lower two legs at the same time on Release the push-buttons at each corner. the same side. Repeat for remaining legs. 9/6/2013...
- Page 6 Close your canopy completely. When your canopy is closed completely, Put into roller bag. use packing straps to wrap the top and frame tightly. MADE IN CHINA FABRIQUÉ EN CHINE 9/6/2013...
- Page 7 10 ft / 3m 10 ft / 3m INSTANT CANOPY × LETTER OF WARRANTY ITM. / ART. 966761 Please be advised that the manufacturer provides a one-year warranty, that the 10 ft/ 3m x 10 ft/ 3m Instant Canopy will be free from defects in the original materials and workmanship.
Need help?
Do you have a question about the INSTANT CANOPY and is the answer not in the manual?
Questions and answers