Increase the distance between the equipment and the receiver • Connect the equipment to a different power outlet other than the one where receiver is connected • Consult a certified television or radio technician Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
USB Driver Installation for Win98, SE, Me, 2K and XP ... 12 Serial ATA Driver installation ... 13 Chapter 4 Playing Audio CDs... 14 Chapter 5 Software Installation... 14 Technical Support & Contact Information ... …15 Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
The contents are subject to change without notice. General Information The Addonics Technologies’ Mobile DVD±R/RW drive is a drive that is designed for both PC and Laptop with Firewire, PCMCIA, Serial ATA and USB Port.
This User Guide For DVD±R/RW with Serial ATA Cable Mobile DVD±R/RW Drive Serial ATA cable with 36 pin connector Sonic MyDVD Software DVD±R/RW Mastering software MPEG II Software AC/DC adapter This User Guide Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
Addonics Mobile Drive firm and securely – you should not be able to disconnect the cable without pressing the release notch. Picture 1 MC-36 Connector AC/DC Adapter Input Jack Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0 Diagram 2 Power Switch...
DVD±R/RW will appear as a CD drive icon. You are now ready to use the DVD±R/RW Drive. Note: for computer that has a 4-pin firewire port, you will need to get a 6 to 4 pin Firewire adapter. Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
CardBus mode supports WIN 95/98/ME/2000 and XP only. For DOS, WIN 3.1x and WIN NT, the switch must be set in PCMCIA mode. For Power Installation please refer to Diagram 2 from page5 Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0 PCMCIA CardBus...
7. Double Click on the “My Computer” icon. Your Mobile DVD±R/RW will appear as a CD drive icon. You are now ready to use the Mobile DVD±R/RW drive. Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0 Be sure to...
Page 10
Installation and that's it. 8. Double Click on the “My Computer” icon. Your Mobile DVD±R/RW Will appear as a CD drive icon. You are now ready to use the DVD±R/RW drive. Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
Page 11
10. Select the WinXP driver then click OK, Click next to continue. 11. Click the "Continue Anyway" to proceed. 12. Let the OS install the Driver and that's it. Click Finish. Click YES to restart the Computer if prompted and that's it. Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
Initialization, a new CD ROM drive icon should appear in the My Computer. You are now ready to use the DVD drive to install the Power DVD MPEG II decoding software. Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
8. You may now access the drive. For Windows Me, 2000 and XP There are NO additional drivers required Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0 For Power Installation please refer to Diagram 2 from page5...
Wait for a few seconds, your computer may blink for a moment as well. Double Click on the “My Computer” icon if not open yet. You are now ready to use the drive. Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
# Click NO for the Diagnostics test. # DO not loose the CD Sleeve. # Please read the on-line Help of the software for all the Detail commands and features of the software. Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
408-433-3899 Fax: 408-433-3898 Email: ATC@Addonics.com Internet: http://www.addonics.com TECHNICAL SUPPORT Phone: 408-433-3855 Hours: 9-6 PST Email: Techinfo@addonics.com Please use our on-line registration card for your Warranty registration. Our web site is www.addonics.com Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0...
Need help?
Do you have a question about the Mobile DVDR/RW and is the answer not in the manual?
Questions and answers