Increase the distance between the equipment and the receiver Connect the equipment to a different power outlet other than the one where receiver is connected Consult a certified television or radio technician Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0...
READ ME FIRST with USB Cable...11 USB Cable Installation ...12 USB Driver Installation for Win98, SE, ME, 2000 ...12 Chapter 4 Playing Audio CDs ...13 Chapter 5 Software Installation ...13 Technical Support & Contact Information ...…14 Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0...
The contents are subject to change without notice. General Information The Addonics Technologies’ Mobile DVD/CDRW drive is a drive that is designed for both PC and Laptop with Firewire, PCMCIA and USB Port. Features External AC/DC universal power adapter.
For DVD/CDRW with USB Cable Mobile DVD/CDRW Drive USB cable with 36 pin connector CD Mastering software MPEG II Software AC/DC adapter USB driver diskette This User Guide Chapter 3 Hardware Installation Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0...
Picture 1 ***Users can connect their Six Pin Firewire Cable Into the Daisy Chain Port to use the Drive as well. *** MC-36 Connector AC/DC Adapter Input Jack Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0 Diagram 2 Power Switch...
7. Double Click on the “My Computer” icon if not open yet. Your Mobile CDRW will appear as a CD drive icon. You are now ready to use the CDRW Drive. Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0...
CardBus mode currently supports WIN 95/98/ME/2000 only. For DOS, WIN 3.1x and WIN NT, the switch must be set in PCMCIA mode. For Power Installation please refer to Diagram 2 from page5 Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0 PCMCIA CardBus...
6. When finished installation, a PCMCIA card icon will appear in the lower right-hand of the Window’s Task Bar. 7. Double Click on the “My Computer” icon. Your Mobile DVD/CDRW will appear as a CD drive icon. You are now ready to use the Mobile DVD/CDRW drive.
Page 10
Type in A:\NT then click continue. 7. Click YES to restart your computer. 8. Double Click on the “My Computer” icon. Your Mobile DVD/CDRW will appear as a CD drive icon. You are now ready to use the DVD/CDRW drive.
Initialization, a new CD ROM drive icon should appear in the My Computer. You are now ready to use the DVD drive to install the Power DVD MPEG II decoding software. Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0...
1. Make sure not to copy from a network drive. 2. If using the CD Copy feature under Easy CD Creator Follow the same procedure from CD Copier Deluxe. Writing at 4X will still vary from system to system. Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0...
Ø If using the drive as a DVD it will require a Pentium III or Faster. For Windows ME and Windows 2000 There are NO additional drivers required Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0...
Chapter 4 Playing Audio CDs You can use the Addonics Mobile DVD/CDRW drive to play regular music CDs. To listen or Play audio CD’s through the computer, you may download the newer version of windows media player. Chapter 5 Software Installation CD Mastering Software installation: 1.
Fremont, CA 94538 Phone: 510-438-6530 Fax: 510-438-5236 Email: ATC@Addonics.com Internet: http://www.addonics.com TECHNICAL SUPPORT Phone: 510-226-8579 Email: Techinfo@addonics.com Please use our on-line registration card for your Warranty registration. Our web site is www.addonics.com Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0...
Need help?
Do you have a question about the Mobile DVD/CDRW and is the answer not in the manual?
Questions and answers