Martha Stewart Living TG70M3P31S00 Quick Start Manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions
should always be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless
marked suitable for indoor and outdoor use. When
products are used in outdoor applications, connect
the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a quali-
fied electrician for proper installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or
electric heaters, fireplaces, candles, or other similar
sources of heat.
e. Do not secure the wiring of the product with staples
or nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any
wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk
of fire, burns, personal injury and electric shock it
should not be played with or placed where small
children can reach it.
i. Do not use this product for other than its intended
use.
j. Do not hang ornaments or other objects from cord,
wire, or light string.
k. Do not close doors or windows on the product or
extensions cords as this may damage the wire
insulation.
l. Do not cover the product with cloth, paper, or any
material that is not a part of the product when in
use.
m.This product has a polarized plug (one blade is
wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not use with an
extension cord unless plug can be fully inserted. Do
not alter or replace the plug.
n. This product is equipped with push-in type lamps.
Do not twist lamps.
o. This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from
The outlet. Also unplug any additional strings or
products that may be attached to the product.
Replace the fuse as per the user servicing instruc-
tions (follow product marking for proper fuse rating)
and check the product.
p .Read and follow all instructions that are on the
product or provide with the product.
SAVE THESE INSTRUCTIONS
q.
Pre-Assembly
Package Contents
Part Description
A Tree top, tag 3
B Tree center, tag 2
C Tree bottom, tag 1
D Tree stand
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (D) and lay the
stand on the floor.
Step 3. Slide the locking disk of the tree stand (D) down
until it snaps into place.
Assembling the tree
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10
minutes!
Step 1. Remove the protective caps from the tree
bottom (C) and insert the pole into the tree
stand (D).
Step 2. Remove the protective caps from the tree
center (B) and insert the pole into the tree
bottom (C) .
Step 3. Insert the tree top (A) into the tree center (B).
Step 4. Shape the branches to your preference by
working from the bottom to the top. When
adjusting branches, ensure that all wires are
free of branch hinges.
Step 5. Insert the green label extension cord plug into
the wall outlet. All your lights should now be lit.
Step 6. When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
If your tree is Perfect Shape™ tree. It does not require
shaping. After removing the tree bands around the
tree, simply shake it to allow the branches to fall into
place. If desired, minor shaping can be done to create a
custom look. The tree is now ready to be decorated
and enjoyed.
Christmas Tree
Model# TG70M3P31S00
Sku # 1000 686 269
Quantity
1
1
1
1