Advertisement
Section 3
S100
S50
S100
Section 2
S50
S100
S50
Section 1
S100
S100
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for
any loose plugs and/or broken, loose, or missing bulbs.
Replace bulbs promptly with the replacement bulbs
provided in order to maintain the performance and life
expectancy of your tree.
Step 1. Connect the light strings of the tree together
and plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers, fuse and
bulbs for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact
the Customer Service Team at 1-877-527-0313 between
the hours of 8 am and 5 pm EST, Monday through
Friday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or enclo-
sures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and
remove all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Insert
Green Label
Foot Pedal
Plug Into Wall
on/off Switch
Outlet
5. When storing the product, carefully remove the product
from wherever it is placed, including
tree, branches, or bushes, to avoid any
undue strain or stress on the product
conductors, connections, and wires.
Cover the protective cap on the poles
to avoid damaging the internal parts.
6. When not in use, store neatly in a cool, dry location
protected from sunlight.
User servicing instructions
FUSED LAMP REPLACEMENT
WARNING - Risk of fire:Do not replace the fuse lamp
contained in this set with any other type of lamp, use only
spare fuse lamps provided with this product. In case of a
burnt out FUSED lamp, the entire series of 50 lamps will be
out. To replace the fused lamp:
1. Grasp the plug and remove
from the receptacle or other
outlet device. Do not unplug
by pulling the cord.
2. Locate the fused lamp with
gray color lamp holder. Pull
the burnt fused lamp
and plastic lamp base straight out of the lamp holder.
3. Replace with a spare fused lamp. The fused lamp can be
distinguished by a gray lamp base and an additional clear
plastic cover.
4. Plug in the lights again.
Fuse replacement
Step 1.Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
Step 2.Open fuse cover. Slide open fuse access cover on top
of attachment plug towards blades.
Step 3.Remove fuse carefully.
Step 4.Risk of fire. Replace fuse only
with 5 Amp, 125 Volt fuse for
the power cord set.
Step 5.Close fuse cover. Slide closed the
fuse access cover on top of
attachment plug.
Step 6.Risk of fire.Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
Troubleshooting
Problem
Solution
Ensure that all tree sections are plugged into
The tree
does not
each other and that the tree is plugged into
light
the wall. If your tree came with a foot pedal,
step on the On/Off button.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with
the replacement fuses provided.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement
bulbs provided
Christmas Tree
Model# TG70M3P31S00
Sku # 1000 686 269
Clear Plastic
Cover
Gray Lamp
Base
Gray Lamp
Holder
SPARE
FUSE
Advertisement
