Polygroup TG66M3545X13 Assembly Instructions

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from

easily set up your new tree.

1. Before you start to assemble your tree, choose an appropriate location.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Fig. A - Tree Stand Assembly

Fig. B - Tree Assembly

3. Each tree section is numbered with a sticker.

4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting into

the assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.

MODEL #: TG66M3545X13

1-888-919-0070

Polygroup®!

Tree Top

Section 2

Section 1

Please identify all sections before assembling.

Carefully follow the instructions below on how to quickly and

(See Fig. B)

Insert and slide the legs

upward into the slots of the

base until firmly secured.

Table of Contents

Do you have a question about the TG66M3545X13 and is the answer not in the manual?

Page 1 Make sure the pole is firmly inserted and secured into the stand. (See Fig. B) 5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top. 6. Allow branches to fall into place or gently pull up and out. MODEL #: TG66M3545X13...
Page 2 7. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig.